Tương thích:

• Dãi đo lường: 0 % ... 100 % oxygen (tại áp suất khí quyển)
• Tuổi thọ cảm biến: ≥ 1 000 000 % volume oxygen hours
• Output in ambient air 13 mV ... 16 mV
• Electrical interface 3 pin (Molex® 22-11-1031)
• Độ chính xác đáp ứng tiêu chuẩn ISO 80601-2-55
• Repeatability < 1 % volume O2 at constant temperature and pressure Linearity error < 3 % relative
• Thời gian đáp ứng < 12 s đến 90 % giá trị thực tế
• Zero offset voltage < 200 µV in 100 % nitrogen, applied for 5 min
• Cross interference meets ISO 80601-2-55 requirements Influence of humidity -0.03 % rel. per % RH at 25 °C
• Pressure range 0.6 bar ... 2 bar (ppO2 0 ... 1250 mbar O2 ) Influence of pressure proportional to change in oxygen partial pressure Influence of mechanical shock < 1 % relative after a fall from 1 m
• Operating temperature 0 °C ... +50 °C
• Temperature compensation built-in NTC compensation
• Effect of temperature compensation (steady state) between +25 °C and +40 °C: 3 % relative error between 0 °C and +50 °C: 8 % relative error
• Operating humidity 0 % ... 99 % RH non-condensing
• Long term output drift < 1 % volume oxygen per month typically < -15 % relative over lifetime
• Storage temperature -20 °C ... +50 °C
• Recommended storage +5 °C … +15 °C
• Recommended load ≥ 10 kOhms
• Warm-up time < 30 minutes, after replacement of sensor
• Weight approximately 28 grams
• Part number 01-00-0047